What are the measures to prevent forklift oil leakage?

What are the measures to prevent oil leakage from forklifts? 1. Carefully dispose of various gaskets. Such as forklift oil pan or valve cover, because of the large touch area, it is not easy to compact, and it will simply cause oil leakage. Oil leaks at the rear oil seal of the crankshaft, and the oil will enter the clutch, which wastes oil and causes the clutch disc to be stained, slipped and burned. 2. Tighten the nuts according to the repair specification. If the forklift is too loose or not tight, the gasket will leak oil; if it is too tight, the metal around the screw hole will bulge or the thread will slip and cause oil leakage. If the oil drain plug of the oil pan (tank shell) is not tightened or loosened, it will simply cause a large amount of oil to be lost, and then an accident of 'burning bushes and holding shafts' will occur. 3. Replace the failed oil seal in time. Forklift truck oil seal device is improper, the journal and the oil seal edge are not the same, it is very simple to throw oil due to deflection; some after long-term use, due to rubber aging and loss of elasticity, Dongguan second-hand forklift seal lip damage or cracking or self-tightening If the spring fails, the oil sealing effect will be lost, and the qualified parts should be corrected or replaced according to the specifications. Fourth, timely replacement of severely worn parts. For example, forklift cylinder liners, pistons, and piston rings are worn to a certain degree, which will cause high-pressure gas in the incinerator to escape into the crankcase. 5. Repair and replace the main bearing in time. When the cooperation gap between the main bearing of the forklift and the shaft journal is too large, the front and rear oil seals will lose their sealing performance due to the impact of the crankshaft, causing oil to leak from the crankshaft head, or oil leaking into the clutch, and then contaminate the friction plate, causing slippage and operation failure. .
warehouse storage equipment ABOUT US processes have been widely used to produce material handling and lifting equipment such as lifting equipment companies, material handling racks, and industrial lifting devices etc.
If you are interested in any of ABOUT US, please feel free to contact us.
Through our distribution and marketing competencies, Jiangsu Jingxin Lifting Equipment Co., Ltd. provides creative, customized, solutions for our customers. As a result, we achieve superior profit growth as the ABOUT US company of choice.
need fuel for energy,while material handling lifting equipment do not.
Through our distribution and marketing competencies, Jiangsu Jingxin Lifting Equipment Co., Ltd. provides creative, customized, solutions for our customers. As a result, we achieve superior profit growth as the ABOUT US company of choice.