What are the charge and discharge characteristics of forklift
batteries? 1. Charging voltage Since the UPS battery is a standby mode of operation, the mains is in a charging state under normal conditions, and will only be discharged when the power fails. In order to prolong the service life of the battery, UPS chargers are generally controlled by means of constant voltage and current limiting, and the battery will change to a floating charge state when it is fully charged. For a battery with a terminal voltage of 12V, the normal float voltage is between 13.5 and 13.8V. If the float voltage is too low, the battery is not fully charged, and the float voltage is too high, which will cause over-voltage charging. When the float voltage exceeds 14V, it is considered to be over-voltage charging. It is strictly forbidden to over-voltage charging the battery pack, because over-voltage charging will cause the electrolyte contained in the battery to be electrolyzed into hydrogen and oxygen and escape, which will increase the electrolyte concentration, resulting in shortened battery life or even damage. 2. Charging current The battery charging current is generally expressed by C, and the actual value of C is related to the battery capacity. For example, if it is a 100Ah battery: C is 100A. The best charging current of Panasonic lead-acid maintenance-free batteries is about 0.1C, and the charging current must not be greater than 0.3C. Excessive or too small charging current will affect the service life of the battery. The ideal charging current should adopt a staged constant current charging method, that is, a larger current is used in the initial stage of charging, and after a certain period of charging, it is changed to a smaller current, and at the end of charging, a smaller current is used. The charging current is generally designed to be 0.1C. When the charging current exceeds 0.3C, it can be considered as overcurrent charging. Avoid using fast chargers to charge, otherwise the battery will be in the state of 'instantaneous overcurrent charging' and 'instantaneous overvoltage chargingOvercurrent charging will cause the battery plates to bend and the active material to fall off, resulting in a decrease in battery power supply capacity, and in severe cases, it will damage the battery.
Collectively, the effect of ABOUT US on industrial society has been to eliminate goods lifting equipment and drastically reduce the time long associated with industrial lifting devices.
You can always ask the experts for the most appropriate material handling lifting equipment ABOUT US for your specific needs. Find the best support, prices and other to ABOUT US solutions at Jingxin forklift.
Unlike the material handling and lifting equipment, the is more flexibly used in accasions where material handling racks .