Regardless of whether it is a person or a device, it is necessary to rest after a long time of work. In the work time of more than ten or even dozens of days or idle time, how to maintain and place the electric pallet will not affect the next year Use it? The editor summarizes the following points for everyone: 1. Fully debug the whole vehicle, check whether the electrical control circuit has hidden troubles, whether the electrical connection line is damaged, and remove it on the spot if necessary; 2. Adjust the front and rear brakes to ensure that the brakes are flexible and reliable ; 3. Whether the steering of the handlebar is reliable, whether there is a phenomenon of mutual sliding between the handlebar and the front fork; 4. Check whether the rear axle gearbox has oil leakage, whether the gasket is damaged, lacks lubricating oil, etc., and replace the gasket in time , Add lubricating oil. The motor sprocket and chain should be lubricated regularly. If they are severely worn, they should be replaced in time to avoid affecting the use. 5. Tighten the bolts of the whole vehicle regularly, check whether there is any looseness or falling off, and apply anti-rust liquid appropriately to avoid the difficulty of later maintenance caused by the rust of the screws. 6. Clean the whole vehicle and wipe it clean; 7. More importantly, check the battery to see if the battery is fixed on the vehicle, whether there are bumps on the surface of the shell, whether the cable is connected reliably, and whether there is dust in the exhaust hole; through the battery To check the charging status and quality status of the electric eye, green means qualified, black means power loss, and white means the battery is damaged and needs to be replaced. There are also many things to consider when charging the battery of an electric pallet truck
. For example, the battery should not be stored at a loss. When the battery is not in use, it should be charged once a month, which can extend the service life of the battery. If the vehicle is not used for a long time or the charging system is faulty, when the battery load voltage is lower than 10V, and the no-load voltage is lower than 12.4V, it must be recharged. When the electrolyte temperature exceeds 40 degrees during charging, stop charging, reduce the current or physically cool down, and stop charging when the temperature reaches 45 degrees to prevent the battery from swelling and exploding.
Jiangsu Jingxin Lifting Equipment Co., Ltd. highlighted the need to foster a human openness to technological innovation.
Energetic, optimistic entrepreneurs often tend to believe that sales growth will take care of everything, that Jiangsu Jingxin Lifting Equipment Co., Ltd. will be able to fund our own growth by generating profits.
Latest technology and manufacturing equipment has improved the quality of ABOUT US.