loading

Talking about why the hydraulic lifting platform needs maintenance

by:Jxforklift     2022-03-08
Talking about why the hydraulic lifting platform needs maintenance equipment maintenance and maintenance 1. The brakes of each mechanism should be checked frequently and the gap between the brake shoes and the brake wheels should be adjusted to ensure flexibility and reliability. There should be no dirt on the friction surface, and the dirt must be washed off with gasoline or thinner. 2. The lubrication of the gearbox, gearbox, external gear and other parts and hydraulic oil are carried out according to the requirements in the lubrication table. 3. Pay attention to check whether there are broken wires and loose strands in the wire ropes. If it exceeds the relevant regulations, it must be replaced immediately. The maintenance of the wire rope should strictly follow the regulations of GB5144-85. 4. Check the connection of each part frequently, and tighten it if there is any looseness. The body connecting bolts should be checked for tightness when the body is under pressure (the method of rotating the arm can be used to create the compressed state), all connecting shafts must have cotter pins, and they need to be fully opened. Hydraulic lifting platform 5. Frequently check whether each mechanism is operating normally and whether there is noise. If any malfunction is found, it must be eliminated in time. 6. When installing, disassembling and adjusting the slewing mechanism, pay attention to ensure that the centerline of the slewing mechanism reducer is parallel to the centerline of the gear, and the meshing surface is not less than 70%, and the meshing gap should be suitable. 7. Always check all wires and cables for damage. Bandage and replace the damaged part in time. 8. When the motor is overheated, stop in time, and continue to run after troubleshooting, and the motor bearing should be well lubricated. 9. The contact surface of each part of the brush should be kept clean, and the pressure of the brush should be adjusted so that the contact area is not less than 50%. 10. All control boxes, distribution boxes, etc. are always kept clean, and dust on electrical equipment is cleaned up in time. 11. The contact opening and closing of the travel switch of each safety device of the lifting platform must be reliable, and the contact crater should be polished in time.
If you have a material handling lifting equipment business, be sure to choose a from Jiangsu Jingxin Lifting Equipment Co., Ltd.. After all, you need quality equipment in order to provide your customers with quality service.
Our vision serves as the framework for our ABOUT US and guides every aspect of our business by describing what we need to accomplish in order to continue achieving sustainable, quality growth.
Advanced technology and manufacturing equipment has enhanced the core quality of ABOUT US.
First, in sparking the initial idea for a company based on manufacturing technology; and second, in designing a solution that could meet a clear market need for solving issues related to ABOUT US material handling and lifting equipment.
Jiangsu Jingxin Lifting Equipment Co., Ltd. has been focusing on reaching the ideal profits.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Dear friends, It may be due to time difference, so we cannot reply in time. We will contact you as soon as possible. My whatspp and wechat number is :+86 18136936691.