Safety Operation Specification for Crank Boom Hydraulic Liftu200b

by:Jxforklift     2022-03-07
Safety operation specification for crank arm hydraulic elevator 1. Raise the upper arm at last. During the operation of the platform rotation, the lower arm must be raised to a certain height before the rotation can be carried out. The rotation should be slow. At the same time, pay attention to whether the distance between the shear arm and the platform and the equipment meets the safety requirements. 2. The use of the lifting platform must be equipped with professional operators who have undergone special training, passed the examination, and are certified. 3. Support is an important preparatory work for platform operation. Flat ground should be selected. If the foundation is soft or undulating, it must be cushioned with sleepers before work can be carried out. 4. Before the lifting platform is operated, the person in charge of the work should give the operator a technical and safety explanation. The content should include: work content and requirements; safety precautions and dangerous points; personnel division and scope of responsibility. 5. Operators on the working platform should wear safety belts. When working in live areas, the car body should be grounded as required. The lifting platform should be directed by the person in charge of the work. The person in charge should follow the gb5082 standard for signaling and lifting The platform operator makes contact. The signal sent must be clear and accurate. 6. The operator of the lifting platform must follow the maintenance regulations of the mechanical equipment and start the elevator platform after performing various inspections and maintenance. The working range of the platform should be checked before the work, and the obstacles that hinder the rotation and walking of the platform truck should be removed. The lifting platform should generally raise the lower arm first, and then the middle arm. In addition to checking the condition of the vehicle and the operators, the person in charge of the work is also responsible for checking the terrain environment, whether the take-off and landing meet the requirements of safety technical measures or the work plan formulated in advance. If there are discrepancies, you should work out corresponding measures before you can start work. Common causes of elevator accidents: operator inattention at work, or too nervous thoughts, or lack of understanding of the structure of the lifting platform and the performance of the workpiece, or unskilled operation and failure to comply with safe operating procedures during operation, Or improper use of personal protective equipment and equipment safety protection devices, etc.
Jiangsu Jingxin Lifting Equipment Co., Ltd. highlighted the need to foster a human openness to technological innovation.
Jxforklift provides supreme quality and ultimate using experience.To know in detail about the prices please visit Jingxin forklift.
Jiangsu Jingxin Lifting Equipment Co., Ltd. affords you a suitable low price for proving our ethical considerations.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Dear friends, It may be due to time difference, so we cannot reply in time. We will contact you as soon as possible. My whatspp and wechat number is :+86 18136936691.