Jingxin forklift manufacturer introduces what should I do if electric forklifts cannot walk?

Jingxin forklift manufacturers carry the mission of providing high-quality forklift products and intelligent logistics equipment to users all over the world, and leading the development of China's forklift industry/electric forklifts and intelligent logistics equipment. We hope to get your continued care and support, and we will definitely gain more With more successful experience, we have achieved greater results in the new round of development.　　What should I do if the electric forklift can't walk?　　1, first check the forklift battery of the electric forklift to see if there is any voltage, and if there is any voltage, check whether the voltage can be used normally. Repair method: charge the battery directly if the battery has no voltage or the voltage is too low.　　 2. Check whether the lifting switch and circuit of the lifting accessories are loose or short-circuited, and whether the micro switch is damaged. Repair method: repair and clean the circuit, replace or repair the micro switch.　　3. Check whether the lifting contactor assembly is burnt out or the coil is short-circuited or disconnected. Repair method: repair the platinum contacts of the contactor or directly replace with a new hydraulic contactor assembly.　　4. Check whether the lifting module is burnt out or is short-circuited or disconnected. Repair method: repair or replace the module assembly.　　5. Check whether the hydraulic motor has voltage, check whether the motor is short-circuited or open or leaking, and check whether the carbon brushes are severely worn. Repair method: repair the circuit, replace the carbon brush of the motor and repair the copper head of the motor, repair the hydraulic motor assembly or replace with a new hydraulic motor.　　6. u200bu200bCheck whether the hydraulic pump, multi-way valve, oil pipe and cylinder of the electric forklift are damaged. Repair method: check and repair the hydraulic pump of the electric forklift or directly replace the new hydraulic pump assembly. If the multi-way valve is damaged, repair or directly replace the new multi-way valve assembly, directly replace the new hydraulic tubing, and replace the cylinder. Repair kit or replace with a new cylinder assembly.　　7. The electric part of the electric forklift is malfunctioning, and suddenly there is no forward or backward movement\the lift has no response, the forklift walks with one rush and one rush, and the forward speed cannot be adjusted, etc.
Jiangsu Jingxin Lifting Equipment Co., Ltd. have now decided to extend our company in other countries.
Jiangsu Jingxin Lifting Equipment Co., Ltd.’s sole aim is to provide exquisite and unheard of features to the concept of producing technology.
need fuel for energy,while lifting equipment companies do not.