Is there any remedy for the broken battery shell of the electric forklift?

During the use of electric forklift batteries, more or less improper use caused the shell to rupture. There are natural aging factors as well as man-made factors. If it is because the casing is broken, the cost is too high to replace the battery. Jingxin electric forklift teaches you some simple remedies: 　　 mainly adopts the plastic welding method, and the specific operation steps are as follows: 　　 1. First find the approximate range of the rupture.　　2. Tighten the liquid filling cap, use a brush dipped in water to scrub the surface, use a temperature-adjustable plastic welding gun (referred to as: welding gun) to dry the water, and seal the vent holes with scotch tape or label paper. It is better to prepare another set of filling caps, and seal the vent holes with plastic rods heated by the welding gun, so that it is more convenient to use during maintenance.　　3. Put the side of the cracked area up, use a brush dipped in water to clean the area around the cracked area, and then dry the water with a welding torch. 4. Choose the gear of the welding gun, heat the plastic rod to melt it and apply it evenly around the rupture, press the prepared patch (the shell of the scrap battery or the shell of the recorder, the material is not limited) on the rupture, and Continue heating for one or two minutes, stop heating and cool down after it is fully bonded.　　 5. Unscrew the liquid filling cap, remove the transparent tape on the liquid filling cap to check the liquid level, if there is leakage or lack of liquid, add electrolyte. If it is not used urgently after repair, it should be supplemented with charging and density adjustment; if it is urgently used, it can be directly loaded into the car for use. Finally, if the battery cell shell of the forklift cannot be repaired, only replace the cell and weld it in order. If your electric forklift battery case is broken, you might as well try the above method, which is very cost-saving! 　　 Jingxin provides high-quality forklift products and intelligent logistics equipment to users all over the world, leading the Chinese forklift industry/electric forklifts and intelligent logistics equipment The mission of development, I hope to get your continued care and support, we will definitely gain more successful experience and achieve greater results in the new round of development.
If you are looking to get started with ABOUT US, it's important to find a quified . Let Jiangsu Jingxin Lifting Equipment Co., Ltd. be your provider. Visit us at Jingxin forklift.
Our vision is to realize the tremendous potential of ABOUT US by providing goods lifting equipment services that consistently meet our customers’ expectations.
The rising industrial lifting devices consciousness observed worldwide are expected to be key factors driving the demand for material handling lifting equipment ABOUT US.
Many business owners and professionals use services like Jiangsu Jingxin Lifting Equipment Co., Ltd. to stay on top of manufacturing industry, monitor products’ quality and keep an eye on competitors.