Instructions for summer maintenance and operating procedures for electric forklifts

by:Jxforklift     2022-01-23
In summer, the temperature rises and high temperatures will have a serious impact on the operation of forklifts. Especially for electric forklifts, pay attention to the cleanliness of the vehicle body during use, reduce dust, and ensure smooth ventilation and heat dissipation of the electric forklift. If any problems are found, stop using them immediately and perform inspections. Don't lose them because they are small.  Summer is a high occurrence period of electric forklift failures. There are two main reasons:   1. Temperature:   1. Ambient temperature: After the battery is used up and charged, pay attention to timely replenishing the battery. When charging, let the electric control and the motor cool down naturally.  2. High-frequency use of electric forklifts can easily cause excessive temperature: Hangzhou forklifts are recommended to stop the vehicle after 4-6 hours of continuous use, and use it after naturally cooling down in a ventilated place for about 45 minutes.   2. Water intake:    There is a lot of rain in summer. For forklift babies who are afraid of water, such as electric forklifts, it is recommended that they do not run in the open air on rainy days and do not wading. In addition: Keep the whole electric forklift clean, use a semi-damp cloth to wipe the body (washing is strictly prohibited), keep the battery part clean, open the battery cover when charging, keep the charging place dry and ventilated, and check the motor carbon brush regularly. If abnormalities occur during operation, Stop immediately and seek professional inspection.  3. The following are the operating procedures for electric forklifts:   1. Keep proper starting speed when starting, and should not be too violent.  2. Pay attention to observe the voltage of the voltmeter. If it is lower than the limit voltage, stop the operation immediately.  3. When the forklift is moving, it is not allowed to flip the direction switch to change the direction of travel to prevent burning of electrical components and damage to the gears.   4. Driving and lifting should not be carried out at the same time.   5. Pay attention to whether the sound of the driving system and steering system is normal. If abnormal sound is found, troubleshoot the fault in time, and strictly prohibit working with illness.  6. u200bu200bDecelerate ahead of time when turning.  7. When working on poor road conditions, the load should be appropriately reduced and the driving speed should be reduced.   8. When carrying goods on a steeply sloped road, pay attention to the firmness of the goods on the forks. Jingxin carries the mission of providing high-quality forklift products and intelligent logistics equipment to users all over the world, and leading the development of China's forklift industry/electric forklifts and intelligent logistics equipment. We hope to get your continued care and support, and we will definitely gain more Successful experience has made greater achievements in the new round of development.
Jxforklift can also foster research that is more useful and influential in society at large.
Jiangsu Jingxin Lifting Equipment Co., Ltd. also maintains a friendly, fair, and creative work environment, which respects diversity, new ideas, and hard work.
goods lifting equipment ABOUT US is one of the most commonly used tool for material handling and lifting equipment.
ABOUT US provider at Jingxin forklift offers a wide variety of in many options. quality is absolutely ensured if you choose us. welcome to visit our factory.
have three basic components.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Dear friends, It may be due to time difference, so we cannot reply in time. We will contact you as soon as possible. My whatspp and wechat number is :+86 18136936691.