Installation and debugging of electric stacker

by:Jxforklift     2022-01-20
Installation and debugging of the electric stacker Before starting the electric stacker, it is necessary to check whether all parts are in good condition, and check the function of all control elements and safety devices. The electric stacker can only use the current generated by the battery, and cannot use the rectified alternating current to avoid damage to the electronic components. It is necessary to check whether the brakes and the battery are fully charged before the electric stacker. After opening the electric lock, move the steering rudder to its motion position, roll the accelerator slowly, and move to the corresponding working area. Rolling the accelerator forward will drive the forklift forward, rolling the accelerator backward will drive it backward, and the accelerator will park when it returns to the middle position. Start, stop or change movement should be slow, because sudden movement may cause danger (because of inertia, especially when walking at high speed). When the forklift is walking, the load should be in a low position, and the forklift should be slowed down in narrow passages or curvy roads where the height of the forks should not exceed 300mm. Unloading operation of electric stacker: 1. Lower the fork to orthogonally approach the shelf and enter its bottom, and then withdraw the fork from the bottom of the shelf. 2. Raise the fork to the required height, make sure that the fork can easily enter under the pallet, slowly approach the pallet to be unloaded until the load is safely placed on the fork. 3. Lift the fork until the pallet is lifted from the shelf, and slowly move out of the channel. 4. Slowly reduce the load and make sure that the fork will not encounter obstacles during the descent process. Stacking operation of electric stacker: 1. Lower the fork to orthogonally approach the shelf and enter its bottom, and then withdraw the fork from the bottom of the shelf. 2. Raise the fork to the required height, make sure that the fork can easily enter under the pallet, slowly approach the pallet to be unloaded until the load is safely placed on the fork. 3. Lift the fork until the pallet is lifted from the shelf, and slowly move out of the channel. 4. Slowly reduce the load and make sure that the fork will not encounter obstacles during the descent process.
material handling racks ABOUT US is liked by everyone and is used in every household.
Jiangsu Jingxin Lifting Equipment Co., Ltd., to be the world leader in products, services and solutions that enable and transform the way consumers and businesses gather, manage, distribute and communicate information.
Jiangsu Jingxin Lifting Equipment Co., Ltd. has enlarged the scope of services, which can fully please customers' demands.
Deeper connections between Jiangsu Jingxin Lifting Equipment Co., Ltd. and customers can be made when we're thinking out of the box and meeting outside of manufacturing work.
Jiangsu Jingxin Lifting Equipment Co., Ltd. provides innovative technology and prompts our customers to know the development of our producing ABOUT US.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Dear friends, It may be due to time difference, so we cannot reply in time. We will contact you as soon as possible. My whatspp and wechat number is :+86 18136936691.