How to solve the problem of forklift oil leakage

Forklift manufacturers remind us that forklift oil leakage must be avoided in advance, and preventive measures should be taken. Be sure to avoid blocking the check valve and vent valve of the forklift truck, because the blocking of the valve hole will easily cause the temperature and pressure in the casing to rise, the resistance of the piston movement and the fuel consumption will increase, the oil and gas will fill the entire space, the consumption of lubricating oil will increase and the replacement cycle will be shortened. . Pay attention to replacing or repairing the main bearing of the forklift. When the matching clearance between the main bearing and the journal is too large, the front and rear oil seals will lose their sealing due to the impact of the crankshaft, causing the oil to leak from the crankshaft head or seep into the clutch, thereby polluting the Friction pads cause slippage. It is also necessary to replace the severely worn parts and the failed oil seal on the forklift in time. The oil seal is not installed properly, and the shaft journal and the oil seal blade are not in harmony. If the elasticity, the sealing lip is damaged and cracked, or the self-tightening spring fails, the oil sealing effect will be lost, and the qualified parts should be repaired or replaced according to the standard. Various gaskets, such as oil pans or valve covers, should also be carefully disposed of, because the large contact area makes it difficult to compact, which can easily cause oil leakage.
are present in just about every facet of modern life.
Best in Jiangsu Jingxin Lifting Equipment Co., Ltd. can handle all sorts of material handling lifting equipment with good efficiency while providing ensured quality. Here you can find so as to solve your industrial lifting devices issues.Go to Jingxin forklift to get fixed.
Even ABOUT US are being made fine with advanced equipment.
ABOUT US allows users to use in innovative ways that fit their individual needs, while at the same time providing cost-effective, reliable and user-friendly products.