Electric forklift manufacturers tell you what are the work safety requirements of electric forklifts

by:Jxforklift     2021-12-27
Electric forklifts are a product that is widely used in logistics and warehouses. No matter what kind of vehicle, it needs to pay attention to some safety during use. Let Jiangsu electric forklift manufacturers tell you what are the work safety requirements of electric forklifts? If there is a problem with an electric forklift, it needs to be repaired at a repair point. Frequent failures will affect the normal operation, so how should we reduce the forklift maintenance rate. 1. A forklift driver equipped with an electric forklift driver's license prevents multiple drivers from one forklift. 2. It is strictly forbidden to stand up and down the fork, and it is not allowed to use a single fork to pick up high and overloaded goods. 3. Overhead guards and shelves must be complete and effective. 4. The connecting part of the lifting cylinder and the main frame should be reliable, the hinged connection between the tilting cylinder and the main frame and the frame should be reliable and sensitive, and the matching clearance should not be too large. The oil cylinder should be well sealed, free from cracks, and work smoothly. Under the rated load, the self-sinking amount of the 10min mast is not more than 20mm, and the inclination angle is not more than 0.5°. The lifting speed at full load should not be less than half of the specified value. 5. The fork frame shall not be severely deformed and the weld seam shall not be welded. There must be no cracks or open welds on the outer surface of the forks. For Songshan Lake forklift rental, the fork root angle shall not be greater than 93°, and the thickness shall not be less than 90% of the original size. The height difference between the left and right fork tips shall not exceed 3% of the fork length. The fork positioning should be firm, the supporting surface and positioning surface of the fork hook should not have obvious defects, the matching gap between the fork and the fork frame should not be too large, and the movement should be smooth. How to reduce forklift maintenance rate? First of all, we need to conduct standardized operations on forklifts. The mast of the forklift shall not be deformed and the welding seam shall be unsoldered. The rolling clearance of the inner and outer masts shall be adjusted reasonably and shall not be larger than 1.5mm. The rollers shall be sensitive to rolling, and the rollers and shafts shall be free of cracks and defects. The wear of the wheel groove shall not be greater than 10% of the original size. The tension of the two lifting chains should be uniform, without distortion, and reliable end connection. The pitch of the chain should not exceed 4% of the original length, otherwise the chain should be replaced. The sprocket rolling should be sensitive. In fact, the reduction of the maintenance rate of electric forklifts is still stressful, because the fork frame must not be severely deformed and the weld seam is not welded. There shall be no cracks or open welding on the surface of the fork. The fork root angle must not be greater than 93°, and the thickness must not be less than 90% of the original scale. The height difference between the left and right fork tips shall not exceed 3% of the length of the horizontal section of the fork. The positioning of the fork should be reliable, the supporting surface and positioning surface of the fork hook must not have significant defects, the cooperation gap between the fork and the fork frame should not be too large, and the movement should be smooth. In the process of using a forklift, we must pay attention to its maintenance to extend its service life.
Jiangsu Jingxin Lifting Equipment Co., Ltd. is recognized as one of the leading manufacturer of in China.Trust in us and make Jiangsu Jingxin Lifting Equipment Co., Ltd. your ABOUT US supplier. Our products will bring more economic value to you.
For more information please see our site at Jingxin forklift. Don't be hesitate to contact us!
Overall, ABOUT US may be a great way for manufacturers to expand their use of technology, but the price could present a significant hurdle for some businesses.
Turn to Jiangsu Jingxin Lifting Equipment Co., Ltd. if you are looking for premier industrial lifting devices solution, affordable packages, and quality ABOUT US products! We produce wide series of high quality, first-class , and provide professional ABOUT US services at great prices.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Dear friends, It may be due to time difference, so we cannot reply in time. We will contact you as soon as possible. My whatspp and wechat number is :+86 18136936691.