Electric forklift manufacturers share that when the electric forklift has abnormal noises, it is necessary to check all relevant parts in turn

The use of electric forklifts can free labor when carrying heavy objects. After all, manual handling of objects will be delayed in terms of physical strength and time. The emergence of electric forklifts saves labor and a lot of use at the same time, which greatly improves the efficiency of cargo handling. If there is a lot of cargo, the electric forklift needs to work all the time when it is fully charged, and various problems will occur when it works for a long time or has a long service life. Let's take the abnormal noise during operation as an example, and the electric forklift manufacturer will explain the reason and repair method of the abnormality. 1. Reasons for the abnormal sound of electric forklift operation 1. The screws of the fasteners of the electric forklift are loose, the guide wheels and rollers of the car body are severely worn, and the gap is too large; 2. The gap between the chain and the chain pin is too large or the fork is on the fork , The gap between the lower staple and the cross beam of the fork frame is too large; 3. Check whether the conflict between the guide wheel, the roller and the mast is too large. Whether the cooperation gap between the fork and the fork frame beam is too large, these factors will cause the electric forklift to make abnormal noise during use; 4. Check whether the electric forklift tire screws are loose, whether the bearing is damaged, etc.; 5. Electric forklift The gear pump is malfunctioning. For example, if air enters the pump from the suction pipe or seal, the resistance of the suction pipe is too large, or even part of it is blocked. Gear pump accuracy is not high. The pump and the coupling are not on the same axis. 2. Maintenance method Add proper lubricating oil to the connection. If the abnormal noise is reduced, it means the leakage problem. Tighten the joint or directly replace the sealing ring; if there is no change, check the gear accuracy, carry out research and adjustment, and it is necessary Replace the gears at the time. Check the coaxiality of the pump and the coupling, pay attention to the difference between the working state and the static state, and adjust according to the technical requirements. There are many reasons for the abnormal noise of electric forklifts. Forklift maintenance personnel should test the cause one by one, so as to fundamentally solve the abnormal noise of the forklift. The above is the reason for the abnormal noise of the electric forklift and the corresponding maintenance method introduced by the editor. I hope that it will be helpful to everyone after reading it. The use of mechanized products such as electric forklifts is indeed convenient for transportation and reduces labor, but it will eventually cause problems. This requires operators to take care of them during use and check their parts after use to avoid occurrences during transportation. problem.
Many of us have heard about ABOUT US and seen some of these units in operation in industrial lifting devices, warehouse storage equipment and lifting equipment companies spaces.
Providing highly qualified ABOUT US products and services, Jiangsu Jingxin Lifting Equipment Co., Ltd. is committed to helping clients make lasting improvements to their performance and realize their most important goals. Over the past decades, we’ve built a firm uniquely equipped to this task. Go to Jingxin forklift for more info.
There's the area of manufacturing ABOUT US that's becoming very important. If you can create those things, you build this closed bond.
Forging an tight connection starts with understanding your potential customers and catering to their needs on ABOUT US, both with a quality product and impactful material handling lifting equipment.